- Launch X431 Series
- AUTOBOSS SERIES
- AUTEL SERIES
- YANHUA SERIES
- XTOOL SERIES
- XHORSE SERIES
- LONSDOR/GODIAG/ADS SERIES
- SMELECOM SERIES
- TOOLS FOR BENZ/BMW
- TOOLS OF ELM327
- VGATE SERIES
- TOOLS for motorbike
- CAR DIAGNOSTIC TOOLS
- HEAVY DUTY DIAGNOSTIC
- OBD2 CODE SCANNER
- VAG DIAGNOSTIC TOOL
- ODOMETER CORRECTION
- key programmer
- reset programmer
- OBD2 cable and CONNECTOR
- ADBLUE EMULATOR
- EMULATOR AND FILTER
- Auto Repair Elements & Accessories
- TRANSPONDER KEY AND SHELL
- AUTO TRANSPONDER CHIP
- Lishi
- GOSO Lock Pick Tools
- KLOM Locksmith Tools
- IC Adapter & Socket
- Others Hot Selling
- OTHER LOCKSMITH TOOLS
Hantek 1008C 8CH PC USB Automotive Diagnostic Digital Oscilloscope DAQ Program Generator 8CH 2.4MSa/s vehicle tester
Availability: In Stock
Ex Tax: $0.00
Parameters:
Model Hantek1008
Oscilloscope Mode
Vertical System
Analog Channel 8
Input Impedance Resistance: 1MΩ
Input Sensitivity 10mV/div to 5V/div
Input Coupling DC
Resolution 12 bits
Horizontal System
Memory Depth 4K
Max. Input 400V (DC+AC Peak)
Real-Time Sampling Rate 2.4MSa/s
Time BaseRange 1ns/div to 20000s/div(1-2-5sequences)
Time Base Precision ±50ppm
Trigger System
Time Base Range 1ns/div to 20000s/div(1-2-5sequences)
Time Base Precision ±50ppm
Trigger Source CH1, CH2,CH3,CH4, CH5, CH6,CH7,CH8
Trigger Mode Edge
X-Y Mode
X-Axis Input CH1
Y-Axis Input CH2
Cursors and Measurement
Voltage Measurement Vpp, Vamp, Vmax, Vmin, Vtop, Vmid, Vbase,Vavg, Vrms, Vcrms, Preshoot, Overshoot
Time Measurement Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width, Duty Cycle
Cursors Measurement Horizontal ,Vertical, Track, Auto Measure Modes
Waveform Signal Process +,- , x,÷, FFT, Invert
Voltage Range 10mV to 5V/div @ x 1 probe
100mV to 50V/div @ x 10 probe
10V to 5000V/div @ x 1000 probe
100V to 50000V/div @ x 10000 probe
200mV to 100V/div @ 20:1
Current Range 100mA to50.0A/div @ CC65(20A)
1000mA to500.0A/div @ CC65(65A)
1A to100.0A/div @ CC650(60A)
1A to200.0A/div @CC1100(100A)
10A to2000.0A/div @CC1100(1100A)
FFT Rectangular, Hanning, Hamming, Blackman Window
Math Addition, subtraction, multiplication, division
Programmable Generator
Channel 8
Output Level LVTTL
Frequency Range 0-250kHz
Interface USB 2.0
Power No need extra power supply
Size & Weight 185 x 150 x 27 (mm); 0.35kg
Introduction:
Cost-effective Hantek PC USB 8CH Automotive Diagnostic Oscilloscope/DAQ/Programmable Generator: Highly efficient and cost effective;
8 channels oscilloscope for vehicle testing;
Auto Ignition Probe;
2.4MSa/s real time sampling rate, 12bit vertical resolution;
spectrum analysis function;
10mV/div to 5V/div input sensitivity;
DAQ card function;
8 channels programmable generator which can analog signals of crankshaft, camshaft, etc.
Features:
(1) Vehicle Testing
First Diagnosis: Intake manifold vacuum & ignition, Petrol fumes adjusting valve vacuum & ignition, Idle exhaust ignition, Starting exhaust ignition
Ignition: primary and secondary
Sensor: Air Flow Meter, Camshaft, Crankshaft, Distributor, Lambda sensor, Throttle position
Bus Diagnosis: CAN bus data examine, CAN bus signal integrity, CAN bus LH long time acquisition, LIN bus
Performer: Petrol/Diesel
Starter and charging circuits
(2) Oscilloscope
8 channels oscilloscope, 2.4MSa/s real time sampling rate
12 bits vertical resolution, spectrum analysis function
(3) Programmable Generator
8 channels programmable generator
Can analog signals of crankshaft, camshaft etc.
(4) Others
USB 2.0 interface plug and play, and no need extra power supply;
More than 20 types of automatic testing function, a similar interface with benchtop oscilloscope, easy to use;
NOTE: Software support: Windows NT, Window 2000, Windows XP, VISTA, Windows 7, Windows 10
Package Content:
1 x 1008C DAQ oscilloscope
1 x Auto-probe
4 x Crocodile probes/cable
4 x BNC Connectors
1 x USB Cable
1 x CD (driver etc.)
1 x Auto-probe instruction
Write a review
Your Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: