- Launch X431 Series
- AUTOBOSS SERIES
- AUTEL SERIES
- YANHUA SERIES
- XTOOL SERIES
- XHORSE SERIES
- LONSDOR/GODIAG/ADS SERIES
- SMELECOM SERIES
- TOOLS FOR BENZ/BMW
- TOOLS OF ELM327
- VGATE SERIES
- TOOLS for motorbike
- CAR DIAGNOSTIC TOOLS
- HEAVY DUTY DIAGNOSTIC
- OBD2 CODE SCANNER
- VAG DIAGNOSTIC TOOL
- ODOMETER CORRECTION
- key programmer
- reset programmer
- OBD2 cable and CONNECTOR
- ADBLUE EMULATOR
- EMULATOR AND FILTER
- Auto Repair Elements & Accessories
- TRANSPONDER KEY AND SHELL
- AUTO TRANSPONDER CHIP
- Lishi
- GOSO Lock Pick Tools
- KLOM Locksmith Tools
- IC Adapter & Socket
- Others Hot Selling
- OTHER LOCKSMITH TOOLS
Adblueobd2 Emulator for MAN Euro6 Truck Emulator (MT)
Availability: In Stock
Ex Tax: $0.00
Adblueobd2 Emulator for MAN Euro6
EURO6 AdBlue Emulators Disable System:
– AdxBlue system (Fully)
– AdxBlue NOX sensor
– DPF system
– DPF temperature sensors
– DPF regeneration
After installing Euro6 Emulator, you can remove:
– DPF sensors – YES
– NOx sensor – YES (only in DAF don’t remove first NOx sensor !!!)
– Adblue temp. sensor (s) – YES
– Adblue pump – YES
– Adblue level sensor – YES
– Adblue ECU – YES
Kindly note: It is possible to disable AdxBlue system by installing an AdxBlue emulator (programmable device) into the vehicle. You can switch it on/off anytime.
EURO6 AdBlue Emulators using guide:
Emulator Man Euro 6 does not need to be learned. You install emulator under the metal cover of AdBlue Pump on the right side behind the cab, and disconnect plug from AdBlue Pump and connect emulator.
Next, you need to remove the fuses:
F894(Multisensor In AdBlue tank)
F738 (+30 Signal of AdBlue pump)
F1084 (NOx sensor Upstream)
Fuse F737 is now fuse of emulator.
Fuse F1109 is the fuse of NOx sensor Downstream and A1191 mufler temperature sensor. This sensor needs to work correctly for DPF regeneration.
Finally, you need to remove Power from NOx downstream sensor. There are two ways options, one is to cut pin 1 in NOx sensor plug, the other way (better) is to remove pin 10 in X3212 plug. This plug is visible on rear of engine on the right side. This is TE plug (16 pin) with yellow key.
Package Includes:
1xMan EURO6 AdBlue Emulator
Write a review
Your Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: