- Launch X431 Series
- AUTOBOSS SERIES
- AUTEL SERIES
- YANHUA SERIES
- XTOOL SERIES
- XHORSE SERIES
- LONSDOR/GODIAG/ADS SERIES
- SMELECOM SERIES
- TOOLS FOR BENZ/BMW
- TOOLS OF ELM327
- VGATE SERIES
- TOOLS for motorbike
- CAR DIAGNOSTIC TOOLS
- HEAVY DUTY DIAGNOSTIC
- OBD2 CODE SCANNER
- VAG DIAGNOSTIC TOOL
- ODOMETER CORRECTION
- key programmer
- reset programmer
- OBD2 cable and CONNECTOR
- ADBLUE EMULATOR
- EMULATOR AND FILTER
- Auto Repair Elements & Accessories
- TRANSPONDER KEY AND SHELL
- AUTO TRANSPONDER CHIP
- Lishi
- GOSO Lock Pick Tools
- KLOM Locksmith Tools
- IC Adapter & Socket
- Others Hot Selling
- OTHER LOCKSMITH TOOLS
SIGLENT SDS1202X-E 14Mpts Memory Depth 200MHz Digital Oscilloscope
Availability: In Stock
Ex Tax: $0.00
SDS1202X-E,14Mpts Memory Depth 200MHz Digital Oscilloscope
Product Overview
The SDS1000X-E series employs a new generation of SPO(Super Phosphor Oscilloscope) technology that provides excellent signal fidelity and performance. The system noise is also lower than similar products in the industry. It comes with a minimum vertical input range of 500 uV/div, an innovative digital trigger system with high sensitivity and low jitter, and a waveform capture rate of 400,000 frames/sec (sequence mode). The SDS1000X-E also employs a 256-level intensity grading display function and a color temperature display mode not found in other models in this class. Siglent’s latest oscilloscopes offering supports multiple powerful triggering modes including serial bus triggering. Decoding is standard configuration including IIC, SPI, UART, CAN,LIN. History waveform recording and sequential triggering enable extended waveform recording and analysis. Another powerful addition is the new 1 million points FFT math function that gives the SDS1000X-E very high frequency resolution when observing signal spectra.
The new design also includes a hardware co-processor that delivers measurements quickly and accurately.
Function & Benefits
7 inch TFT-LCD display with 800 * 480 resolution
200MHz bandwidth with real-time sampling rate up to 1 GSa/s
Waveform capture rate up to 100,000 wfm/s (normal mode), and 400,000 wfm/s (sequence mode)
Record length up to 14 Mpts
Multiple interface types: USB Host, USB Device (USBTMC),LAN (VXI-11), Pass/Fail, Trigger Out
Supports SCPI remote control commands
Specifications
Bandwidth 200MHz
Sample Rate 1GSa/s (Single Channel), 500MSa/s (Dual Channel)
Memory Depth (Max.) 7 Mpts/CH (Dual-Channel); 14 Mpts/CH (Single-Channel)
Waveform Capture Rate (Max.) 100,000 wfm/s (normal mode), 400,000 wfm/s (sequence mode)
Channel 2+EXT
Vertical Resolution (A/D) 8 bit
Vertical Scale(Probe 1X) 500μV/div~10 V/div (1~2~5 sequence)
Rise Time (at input, typical) Typical 1.8 ns
Overshoot (500 ps Pulse) <10%
Horizontal Scale (s/div) 1.0ns/div~100s/div
Timebase Accuracy ±25 ppm
Display 7 inch TFT-LCD (800*480)
Input Impedance DC: (1 MΩ±2%) || (18 pF ±2 pF)
DC Coupling DC, AC, GND
Channel Isolation DC~ Max BW >40 dB
Max Input Voltage 1 MΩ ≤400 Vpk (DC + Peak AC≤10 kHz)
DC Gain Accuracy ≤±3.0%: 5 mV/div ~10 V/div ; ≤±4.0%: ≤2 mV/div
Probe Attenuator 0.1X, 0.2X, 0.5X, 1X, 2X, 5X, 10X…… 1000X, 2000X, 5000X, 10000X
Waveform Interpolation Sinx/x, Linear
Trigger Type Edge, Slope, Pulse Width, Window, Runt, Interval, Dropout, Pattern, Video
Trigger Coupling AC, DC, LFRJ, HFRJ, Noise RJ (CH1~CH2)
Trigger Mode Auto, Normal, Single
Trigger Accuracy (Typical) Internal: ±0.2 div; EXT: ±0.4 div
Serial Trigger (Standard) I2C, SPI, UART/ RS232, CAN, LIN
Decode Type (Standard) I2C, SPI, UART/ RS232, CAN, LIN
Cursor Measurement Manual : Time X1, X2, (X1-X2), (1/ΔT) Voltage Y1, Y2, (Y1-Y2); Track: Time X1, X2, (X1-X2)
Automatic Measurement 38 Types
Waveform Math + , - , * , / , FFT , d/dt , ∫dt , √
Waveform Storage 80,000 frames(Max.)
Communication Interface USB Host, USB Device, LAN, Pass/Fail, Trigger Out
Power Supply 100~240 VAC, CAT II, Auto selection
Dimension (W x H x D) 312 mm(L)*134mm(W)*150mm(H)
Weight N.W: 2.5kg; G.W: 3.5kg
Write a review
Your Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: