Your shopping cart is empty!
Categories
- Launch X431 Series
- AUTOBOSS SERIES
- AUTEL SERIES
- YANHUA SERIES
- XTOOL SERIES
- XHORSE SERIES
- LONSDOR/GODIAG/ADS SERIES
- SMELECOM SERIES
- TOOLS FOR BENZ/BMW
- TOOLS OF ELM327
- VGATE SERIES
- TOOLS for motorbike
- CAR DIAGNOSTIC TOOLS
- HEAVY DUTY DIAGNOSTIC
- OBD2 CODE SCANNER
- VAG DIAGNOSTIC TOOL
- ODOMETER CORRECTION
- key programmer
- reset programmer
- OBD2 cable and CONNECTOR
- ADBLUE EMULATOR
- EMULATOR AND FILTER
- Auto Repair Elements & Accessories
- TRANSPONDER KEY AND SHELL
- AUTO TRANSPONDER CHIP
- Lishi
- GOSO Lock Pick Tools
- KLOM Locksmith Tools
- IC Adapter & Socket
- Others Hot Selling
- OTHER LOCKSMITH TOOLS
Latest
Bestsellers
Adblueobd2 Emulator for Iveco Euro6 Truck Emulator
Product Code: NA1026
Availability: In Stock
Availability: In Stock
Price:
Ex Tax: $0.00
$0.00
Ex Tax: $0.00
Related Download Files:
TYPE1:
EURO 6 ADBLUE CANCEL EMULATOR for DAF INSTALLATION
You must attach the emulator to the rear of the silencer under the EAS ecu.
You must first disconnect the nox sensor cables and connect the emulator cables to the NOxcables.
you must obtain fuseo F22 (e497 15A)
CAN cables are located at the top of the NOx socket.
Carside mutator side
CAN H----------------------->WHITE cable
CAN L------------------------> BROWN cable
POWER(+)-------------------->RED cable
GND(-)------------------------> Black cable
IMPORTANT NOTE:
Only the CAN cables are to be connected from the NOx socket as the truck’sfuse has been taken. For power connections you need to use ground (GND) and contact(+).
Youmust clear the error codes from the engine ECU, If you do not have DAVIE software, you can us DAF Euro 6 DTC Eraser.
The connection type DAF460/480 is the same but the NOx socket locations are different. The following are shown.
TYPE 2
Features of AdblueOBD2 For IVECO EURO6
AdBlue emulator for iveco Euro 6 not need to be learned.We fit emulator under the cover of AdBlue tank (behind of right front wheeL)
SCR system in Iveco Euro 6 is not typical. All aftertreatment process is managed by engine ECU EDC17 Cv41 there is no additonal AdBlue ECU system. So some of the components connected direcly to engine ECU should be electrycally operating property, (AdBlue injector, directional Valle, temperature sensors)
Emulator replaces the work:
Nox Sensor(downstream)
Nox Sensor(upstream)
NH3 Sensor
CAN wires we need connect separetly
The best place for it is plug ST55A (you can find it on the vehicle frame, right side of engine,above the right front wheel)
WHITE- to pin 22 (CAN H)
BROWN-to pin 21(CAN L)
Now only we need connect power (emulators red cable as VCC and black cable as GND) to ignition power. Just remove the fuse NUMBER 70405 from 4th block.
ForIveco Eurocargo
Emulator Vehicle side
WHITE (CAN H)----------------> NoX Socket 4 pin
BROWN (CAN L)--------------->NoX Socket 3 pin
Red (positive +)----------------> AdBlue socket 9 pin (7542)-(or ignition contact Line)
Black(GND-)--------------------> AdBlue socket 8 pin(o549)-(or chassis to print)
Remove the fuse number 3(15A)at block 70000/2 from the fuse box. Erase any errors.
Write a review
Your Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: